Pulsar Guard 2011G - Pig Detector

The Isensys' Pig Detection System provides reliable non-invasive acoustic monitoring, that ensures the pig has been launched, travelled safely around the pipework and received successfully after the process.

The Pulsar Guard 2011G pig detector is suitable for use with Galvanically isolating barriers only and an intrinsically safe earth is not required. It operates within a -40ºC to +92ºC (-40ºF to 197.6ºF) range - depending on version selected.

Isensys offer an optional DIN rail signal conditioner in order to create a full pig detection system.

Technical Specification

Pulsar Guard 2011G Pig Detector

Dimensions overall: 125mmL x 31mmH x 65mmW
Weight: Nominal 0.5kg (excluding cable)
Case Material/Description: Type 316 Stainless Steel (investment casting)
Mounting: 14mm hole in tab, suitable for 12mm or 1/2" threaded fixing
IP Rating (electronics housing): IP68
Max. & Min. Temperature (electronics): -40°C to +85°C (-40°F to +185°F)
CE Approval: EMC Approval to BS EN 50081-1:1992 for emissions and BS EN 50082-2: 1995 for immunity
Hazardous Area Approval:
ATEX IS: (-40ºF) to +40ºC/+104ºF (EEx ia IIC T6) OR to +92ºC/+197.6ºF (EEx ia IIC T4)
Analogue Output: 0-10Vdc
Power Supply: 23 to 30Vdc (Hazardous area versions 24 to 26V via suitable galvanic barriers)
Current Consumption: Typically 15mA

Pulsar Guard 2011G Pig Detector

Isensys DIN Rail Signal Conditioner

Pig Detector Installation - Isensys

Pulsar Guard 2011G Manual